Source Isolation Measurements in a Multi-Source Coupled System

Abhishek Patnaik; Guangyao Shen; David Pommerenke; Martin Boettcher; Herman Aichele; Christoph Keller; Victor Khilkevich

doi:10.1109/ISEMC.2017.8077844

Source Isolation Measurements in a Multi-Source Coupled System

Abhishek Patnaik
, Guangyao Shen
, David Pommerenke
, Martin Boettcher
, Herman Aichele
, Christoph Keller
, Victor Khilkevich

Electrical and Computer Engineering

Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

An electronic system will commonly have multiple emission (or noise) sources, some of which are correlated while others are un-correlated. Measuring the contribution to a node voltage or branch current by an individual source with high accuracy in such a multi source inter-coupled system is a fundamental problem. The problem is further amplified when the signal processing following the measurements is highly sensitive to the error in the measured parameters. This article describes a filtering method which can isolate the measured parameter (voltage or current) of the contribution of other such sources while preserving the phase and magnitude associated with the source under consideration.

Original language	American English
Journal	Proceedings of the 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (2017, Washington, DC)
DOIs	https://doi.org/10.1109/ISEMC.2017.8077844
State	Published - Aug 1 2017

Keywords

Adaptive Noise Cancellation
Black box model
EMI
Terminal modelling
selective source filtering

Disciplines

Electrical and Computer Engineering

Access to Document

10.1109/ISEMC.2017.8077844License: Unspecified

https://doi.org/10.1109/ISEMC.2017.8077844

Cite this

@article{dd2f7500a1864f3ca4d41f70671e414a,

title = "Source Isolation Measurements in a Multi-Source Coupled System",

abstract = " An electronic system will commonly have multiple emission (or noise) sources, some of which are correlated while others are un-correlated. Measuring the contribution to a node voltage or branch current by an individual source with high accuracy in such a multi source inter-coupled system is a fundamental problem. The problem is further amplified when the signal processing following the measurements is highly sensitive to the error in the measured parameters. This article describes a filtering method which can isolate the measured parameter (voltage or current) of the contribution of other such sources while preserving the phase and magnitude associated with the source under consideration.",

keywords = "Adaptive Noise Cancellation, Black box model, EMI, Terminal modelling, selective source filtering",

author = "Abhishek Patnaik and Guangyao Shen and David Pommerenke and Martin Boettcher and Herman Aichele and Christoph Keller and Victor Khilkevich",

year = "2017",

month = aug,

day = "1",

doi = "10.1109/ISEMC.2017.8077844",

language = "American English",

journal = "Proceedings of the 2017 IEEE International Symposium on Electromagnetic Compatibility \& Signal/Power Integrity (2017, Washington, DC)",

}

TY - JOUR

T1 - Source Isolation Measurements in a Multi-Source Coupled System

AU - Patnaik, Abhishek

AU - Shen, Guangyao

AU - Pommerenke, David

AU - Boettcher, Martin

AU - Aichele, Herman

AU - Keller, Christoph

AU - Khilkevich, Victor

PY - 2017/8/1

Y1 - 2017/8/1

N2 - An electronic system will commonly have multiple emission (or noise) sources, some of which are correlated while others are un-correlated. Measuring the contribution to a node voltage or branch current by an individual source with high accuracy in such a multi source inter-coupled system is a fundamental problem. The problem is further amplified when the signal processing following the measurements is highly sensitive to the error in the measured parameters. This article describes a filtering method which can isolate the measured parameter (voltage or current) of the contribution of other such sources while preserving the phase and magnitude associated with the source under consideration.

AB - An electronic system will commonly have multiple emission (or noise) sources, some of which are correlated while others are un-correlated. Measuring the contribution to a node voltage or branch current by an individual source with high accuracy in such a multi source inter-coupled system is a fundamental problem. The problem is further amplified when the signal processing following the measurements is highly sensitive to the error in the measured parameters. This article describes a filtering method which can isolate the measured parameter (voltage or current) of the contribution of other such sources while preserving the phase and magnitude associated with the source under consideration.

KW - Adaptive Noise Cancellation

KW - Black box model

KW - EMI

KW - Terminal modelling

KW - selective source filtering

UR - https://scholarsmine.mst.edu/ele_comeng_facwork/2418

UR - https://doi.org/10.1109/ISEMC.2017.8077844

U2 - 10.1109/ISEMC.2017.8077844

DO - 10.1109/ISEMC.2017.8077844

M3 - Article

JO - Proceedings of the 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (2017, Washington, DC)

JF - Proceedings of the 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (2017, Washington, DC)

ER -

Source Isolation Measurements in a Multi-Source Coupled System

Abstract

Keywords

Disciplines

Access to Document

Other files and links

Fingerprint

Cite this