Mitigating Power Bus Noise with Embedded Capacitance in PCB Designs

Minjia Xu; Todd H. Hubing; Juan Chen; James L. Drewniak; Thomas Van Doren; Richard E. DuBroff

doi:10.1109/ISEMC.2001.950691

Mitigating Power Bus Noise with Embedded Capacitance in PCB Designs

Minjia Xu
, Todd H. Hubing
, Juan Chen
, James L. Drewniak
, Thomas Van Doren
, Richard E. DuBroff

Electrical and Computer Engineering

Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

This paper investigates the power bus noise and power bus impedance of printed circuit boards with four different kinds of embedded capacitance. These boards have power-ground plane pairs separated by a very thin layer of material with high dielectric permittivity. It is shown that embedded capacitance effectively reduces power bus noise over the entire frequency range evaluated (up to 5 GHz).

Original language	American English
Pages (from-to)	496-500
Number of pages	5
Journal	Proceedings of the IEEE International Symposium on Electromagnetic Compatibility (2001, Montreal, Quebec)
Volume	1
DOIs	https://doi.org/10.1109/ISEMC.2001.950691
State	Published - Aug 1 2001
Event	2001 International Symposium on Electromagnetic Compatibility - Montrealm, Que., Canada Duration: Aug 13 2001 → Aug 17 2001

ASJC Scopus Subject Areas

Condensed Matter Physics
Electrical and Electronic Engineering

Keywords

Capacitance
Embedded Systems
Frequencies
Permittivity
Spurious Signal Noise, Power Bus Noise, Printed Circuit Design
Capacitors
Dielectric Materials
Circuit Noise
Printed Circuits
Clocks
Frequency
Composite Materials
Circuit Testing
Electromagnetic Compatibility
Multichip Modules
Electromagnetic Interference
Frequency Range
Power Bus Noise Mitigation
Power Bus Impedance
Printed Circuit Boards
PCB Designs
EMI
EMC
Embedded Capacitance
Power-Ground Plane Pairs
Dielectric Permittivity

Disciplines

Electrical and Computer Engineering

Access to Document

10.1109/ISEMC.2001.950691License: CC BY

Mitigating Power Bus Noise with Embedded Capacitance in PCB DesigFinal published version, 517 KBLicense: CC BY

Cite this

@article{ddcf2048c533444bb38fb58a2a7c1e96,

title = "Mitigating Power Bus Noise with Embedded Capacitance in PCB Designs",

abstract = " This paper investigates the power bus noise and power bus impedance of printed circuit boards with four different kinds of embedded capacitance. These boards have power-ground plane pairs separated by a very thin layer of material with high dielectric permittivity. It is shown that embedded capacitance effectively reduces power bus noise over the entire frequency range evaluated (up to 5 GHz).",

keywords = "Capacitance, Embedded Systems, Frequencies, Permittivity, Spurious Signal Noise, Power Bus Noise, Printed Circuit Design, Capacitors, Dielectric Materials, Circuit Noise, Printed Circuits, Clocks, Frequency, Composite Materials, Circuit Testing, Electromagnetic Compatibility, Multichip Modules, Electromagnetic Interference, Frequency Range, Power Bus Noise Mitigation, Power Bus Impedance, Printed Circuit Boards, PCB Designs, EMI, EMC, Embedded Capacitance, Power-Ground Plane Pairs, Dielectric Permittivity",

author = "Minjia Xu and Hubing, \{Todd H.\} and Juan Chen and Drewniak, \{James L.\} and \{Van Doren\}, Thomas and DuBroff, \{Richard E.\}",

year = "2001",

month = aug,

day = "1",

doi = "10.1109/ISEMC.2001.950691",

language = "American English",

volume = "1",

pages = "496--500",

journal = "Proceedings of the IEEE International Symposium on Electromagnetic Compatibility (2001, Montreal, Quebec)",

note = "2001 International Symposium on Electromagnetic Compatibility ; Conference date: 13-08-2001 Through 17-08-2001",

}

TY - JOUR

T1 - Mitigating Power Bus Noise with Embedded Capacitance in PCB Designs

AU - Xu, Minjia

AU - Hubing, Todd H.

AU - Chen, Juan

AU - Drewniak, James L.

AU - Van Doren, Thomas

AU - DuBroff, Richard E.

PY - 2001/8/1

Y1 - 2001/8/1

N2 - This paper investigates the power bus noise and power bus impedance of printed circuit boards with four different kinds of embedded capacitance. These boards have power-ground plane pairs separated by a very thin layer of material with high dielectric permittivity. It is shown that embedded capacitance effectively reduces power bus noise over the entire frequency range evaluated (up to 5 GHz).

AB - This paper investigates the power bus noise and power bus impedance of printed circuit boards with four different kinds of embedded capacitance. These boards have power-ground plane pairs separated by a very thin layer of material with high dielectric permittivity. It is shown that embedded capacitance effectively reduces power bus noise over the entire frequency range evaluated (up to 5 GHz).

KW - Capacitance

KW - Embedded Systems

KW - Frequencies

KW - Permittivity

KW - Spurious Signal Noise, Power Bus Noise, Printed Circuit Design

KW - Capacitors

KW - Dielectric Materials

KW - Circuit Noise

KW - Printed Circuits

KW - Clocks

KW - Frequency

KW - Composite Materials

KW - Circuit Testing

KW - Electromagnetic Compatibility

KW - Multichip Modules

KW - Electromagnetic Interference

KW - Frequency Range

KW - Power Bus Noise Mitigation

KW - Power Bus Impedance

KW - Printed Circuit Boards

KW - PCB Designs

KW - EMI

KW - EMC

KW - Embedded Capacitance

KW - Power-Ground Plane Pairs

KW - Dielectric Permittivity

UR - https://scholarsmine.mst.edu/ele_comeng_facwork/1731

U2 - 10.1109/ISEMC.2001.950691

DO - 10.1109/ISEMC.2001.950691

M3 - Article

VL - 1

SP - 496

EP - 500

JO - Proceedings of the IEEE International Symposium on Electromagnetic Compatibility (2001, Montreal, Quebec)

JF - Proceedings of the IEEE International Symposium on Electromagnetic Compatibility (2001, Montreal, Quebec)

T2 - 2001 International Symposium on Electromagnetic Compatibility

Y2 - 13 August 2001 through 17 August 2001

ER -

Mitigating Power Bus Noise with Embedded Capacitance in PCB Designs

Abstract

ASJC Scopus Subject Areas

Keywords

Disciplines

Access to Document

Other files and links

Fingerprint

Cite this