Generic Visual Simulation of Manufacturing Equipment

Sweta Dhaveji Chakravadhanula; Todd E. Sparks; Jianzhong Ruan; Frank W. Liou

doi:10.1115/DETC2011-47908

Generic Visual Simulation of Manufacturing Equipment

Sweta Dhaveji Chakravadhanula
, Todd E. Sparks
, Jianzhong Ruan
, Frank W. Liou

Mechanical and Aerospace Engineering

Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

Simulation of a machine is very important before laser metal deposition is performed, as a tool to check collision detection and validate deposition result. There are several kinds of machines that are used for laser deposition and hence there is a need for a generalized concept for visual simulation of various kinds of machines. This paper presents the research conducted on describing each machine configuration in a generic format. A parent - child list and a dependency list obtained from the machine configuration are utilized to form the generic format. Such a format can be used to describe linear and rotational motion of the machines parts. This method has been tested on various examples to demonstrate its robustness and efficiency. Copyright © 2011 by ASME.

Original language	American English
Journal	Proceedings of the ASME Design Engineering Technical Conference
DOIs	https://doi.org/10.1115/DETC2011-47908
State	Published - Jan 1 2011

Keywords

Collision Detection
Laser Depositions
Laser Metal Depsition
Manufacturing Equipment
Rotational Motion
Visual Simulation

Disciplines

Aerospace Engineering
Mechanical Engineering

Access to Document

10.1115/DETC2011-47908License: Unspecified

https://doi.org/10.1115/DETC2011-47908

Cite this

@article{7a3d3e2bf7594e019f7c27c62e1b35de,

title = "Generic Visual Simulation of Manufacturing Equipment",

abstract = " Simulation of a machine is very important before laser metal deposition is performed, as a tool to check collision detection and validate deposition result. There are several kinds of machines that are used for laser deposition and hence there is a need for a generalized concept for visual simulation of various kinds of machines. This paper presents the research conducted on describing each machine configuration in a generic format. A parent - child list and a dependency list obtained from the machine configuration are utilized to form the generic format. Such a format can be used to describe linear and rotational motion of the machines parts. This method has been tested on various examples to demonstrate its robustness and efficiency. Copyright {\textcopyright} 2011 by ASME.",

keywords = "Collision Detection, Laser Depositions, Laser Metal Depsition, Manufacturing Equipment, Rotational Motion, Visual Simulation",

author = "Chakravadhanula, \{Sweta Dhaveji\} and Sparks, \{Todd E.\} and Jianzhong Ruan and Liou, \{Frank W.\}",

year = "2011",

month = jan,

day = "1",

doi = "10.1115/DETC2011-47908",

language = "American English",

journal = "Proceedings of the ASME Design Engineering Technical Conference",

}

TY - JOUR

T1 - Generic Visual Simulation of Manufacturing Equipment

AU - Chakravadhanula, Sweta Dhaveji

AU - Sparks, Todd E.

AU - Ruan, Jianzhong

AU - Liou, Frank W.

PY - 2011/1/1

Y1 - 2011/1/1

N2 - Simulation of a machine is very important before laser metal deposition is performed, as a tool to check collision detection and validate deposition result. There are several kinds of machines that are used for laser deposition and hence there is a need for a generalized concept for visual simulation of various kinds of machines. This paper presents the research conducted on describing each machine configuration in a generic format. A parent - child list and a dependency list obtained from the machine configuration are utilized to form the generic format. Such a format can be used to describe linear and rotational motion of the machines parts. This method has been tested on various examples to demonstrate its robustness and efficiency. Copyright © 2011 by ASME.

AB - Simulation of a machine is very important before laser metal deposition is performed, as a tool to check collision detection and validate deposition result. There are several kinds of machines that are used for laser deposition and hence there is a need for a generalized concept for visual simulation of various kinds of machines. This paper presents the research conducted on describing each machine configuration in a generic format. A parent - child list and a dependency list obtained from the machine configuration are utilized to form the generic format. Such a format can be used to describe linear and rotational motion of the machines parts. This method has been tested on various examples to demonstrate its robustness and efficiency. Copyright © 2011 by ASME.

KW - Collision Detection

KW - Laser Depositions

KW - Laser Metal Depsition

KW - Manufacturing Equipment

KW - Rotational Motion

KW - Visual Simulation

UR - https://scholarsmine.mst.edu/mec_aereng_facwork/1073

UR - https://doi.org/10.1115/DETC2011-47908

U2 - 10.1115/DETC2011-47908

DO - 10.1115/DETC2011-47908

M3 - Article

JO - Proceedings of the ASME Design Engineering Technical Conference

JF - Proceedings of the ASME Design Engineering Technical Conference

ER -

Generic Visual Simulation of Manufacturing Equipment

Abstract

Keywords

Disciplines

Access to Document

Other files and links

Fingerprint

Cite this