Skip to main navigation Skip to search Skip to main content

Electrochemical and Structural Changes in Cerium Based Conversion Coatings During Exposure to Salt Spray

Research output: Contribution to journal › Article › peer-review

Abstract

Cerium-based conversion coatings on aluminum alloy 2024-T3 substrates were characterized after various exposure times in salt spray corrosion testing. Coatings post-treated in phosphate solutions exhibited no visible corrosion after seven days. Impedances doubled for these coatings after 12 hours of testing and a ~150 nm thick alumina layer developed after 24 hours of exposure, leading to the conclusion that post-treated coatings facilitated the formation of a protective alumina layer. As-deposited coatings exhibited significant corrosion after 24 hours of exposure and had impedances that were an order of magnitude lower than post-treated coatings. Subsurface voids present underneath coatings corroded into nodules of alumina on the surface of as-deposited coatings. in contrast, the voids corroded into small pits with little corrosion product present in post-treated coatings, which was attributed to a protective oxide present around the voids.

Original languageAmerican English
JournalECS Transactions
DOIs
StatePublished - Jan 1 2010

Keywords

  • Coatings for Al Alloys

Disciplines

  • Materials Science and Engineering

Fingerprint

Dive into the research topics of 'Electrochemical and Structural Changes in Cerium Based Conversion Coatings During Exposure to Salt Spray'. Together they form a unique fingerprint.

Cite this