Skip to main navigation Skip to search Skip to main content

Development of Autonomous Triggering Instrumentation

  • Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

Triggering instrumentation for autonomous monitoring of load-induced strain is described for economical, fast bridge inspection. The development addresses one aspect for the management of transportation infrastructure - bridge monitoring and inspection. The objectives are to provide quantitative performance information from a load test, to minimize the setup time at the bridge, and to minimize the closure time to traffic. Multiple or networked measurements can be made for a prescribed loading sequence. The proposed smart system consists of in-situ strain sensors, an embedded data acquisition module, and a measurement triggering system. A companion control unit is mounted on the truck serving as the load. As the truck moves to the proper position, the desired measurement is automatically relayed back to the control unit. In this work, the testing protocol is developed and the performance parameters for the triggering and data acquisition are measured. The test system uses a dedicated wireless sensor mote and an infrared positioning system. The electronic procedure offers improvements in available information and economics.

Original languageAmerican English
Article number693235
JournalProceedings of SPIE
Volume6932
DOIs
StatePublished - Jan 1 2008
EventSensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2008 - San Diego, CA, United States
Duration: Mar 10 2008 → Mar 13 2008

Keywords

  • Autonomous Monitoring
  • Triggering Instrumentation
  • Loads (Mechanics)
  • Strains and stresses

Disciplines

  • Electrical and Computer Engineering

Fingerprint

Dive into the research topics of 'Development of Autonomous Triggering Instrumentation'. Together they form a unique fingerprint.

Cite this