Abstract
ZrSiO 4 /ZrSiO 4 fibrous monoliths (FMs) have been fabricated using both ram and screw extrusion processing methods to form unidirectional [0⁰] architectures. Ram extrusion has been the traditional process for fabricating FMs, in which a controlled-geometry feedrod containing the cell and cell-boundary phases as ceramic/polymer blends is forced through a die. Conventional screw extrusion has also been used more recently to fabricate FM filaments. Both techniques resulted in FMs that exhibit graceful failure in flexure. Peak strengths are in the range of 90-100 MPa with load retention after fracture occurs.
| Original language | American English |
|---|---|
| Pages (from-to) | 605-612 |
| Number of pages | 8 |
| Journal | Proceedings of the 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A (2000, Cocoa Beach, FL) |
| Volume | 21 |
| Issue number | 3 |
| DOIs | |
| State | Published - Jan 1 2000 |
| Event | 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures:A - Cocoa Beach, FL, USA Duration: Jan 23 2000 → Jan 28 2000 |
ASJC Scopus Subject Areas
- Ceramics and Composites
- Materials Chemistry
Keywords
- Bending strength
- Cell boundary
- Cell boundary phase
- Extrusion
- Extrusion dies
- Feedrod
- Fiber resuborced materials
- Flexure
- Fracture
- Grain growth
- Grain size and shape
- High temperature properties
- Load retention
- Polymer blends
- Ram extrusion
- Screw extrusion
- Sintering
- Zircon
- Zirconium silicate fibrous monoliths
Disciplines
- Materials Science and Engineering
Fingerprint
Dive into the research topics of 'Comparison Study of the Processing Methods and Properties for Zirconium Silicate Fibrous Monoliths'. Together they form a unique fingerprint.Cite this
- APA
- Standard
- Harvard
- Vancouver
- Author
- BIBTEX
- RIS