Comparison of anode and electrolyte support configuration of single-chamber SOFC

Fatih Dogan; P. Jasinki; T. Suzuki; Z. Byars; H. U. Anderson

doi:10.1149/200307.1101PV

Comparison of anode and electrolyte support configuration of single-chamber SOFC

Fatih Dogan
, P. Jasinki
, T. Suzuki
, Z. Byars
, H. U. Anderson

Materials Science and Engineering

Electronic Materials Applied Research Center, Missouri University of Science and Technology, Rolla, Mo.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

The single-chamber solid oxide fuel cell (SOFC) has recently received
considerable attention. This type of fuel cell operates in the mixed reactant
gas and therefore does not require separation of the fuel and oxidant gases.
In this paper we report the anode- and electrolyte-supported configurations
of the single chamber SOFC that we have studied. The system based on
typical fuel cell composition has been examined: yttrium stabilized
zirconia (YSZ) as an electrolyte, nickel/YSZ cermet as an anode,
lanthanum strontium manganese oxide (LSM) as a cathode. The cells were
prepared by tape-casting and screen-printing techniques. The cathode
processing parameters have been correlated with fuel cell performance.
The results of the single chamber were compared with conventional
SOFCs tested in our laboratory.

Original language	American English
Title of host publication	Eighth International Symposium on Solid Oxide Fuel Cells (SOFC-VIII)
Publisher	IOP Publishing
Pages	1101-1108
Volume	2003-07
DOIs	https://doi.org/10.1149/200307.1101PV
State	Published - 2003

Access to Document

10.1149/200307.1101PV

https://iopscience.iop.org/article/10.1149/200307.1101PV/meta#:~:text=10.1149/200307.1101PV

Cite this

@inproceedings{ab25b1b2e48b4d88ac9088d5c20e1d36,

title = "Comparison of anode and electrolyte support configuration of single-chamber SOFC",

abstract = "The single-chamber solid oxide fuel cell (SOFC) has recently received considerable attention. This type of fuel cell operates in the mixed reactant gas and therefore does not require separation of the fuel and oxidant gases. In this paper we report the anode- and electrolyte-supported configurations of the single chamber SOFC that we have studied. The system based on typical fuel cell composition has been examined: yttrium stabilized zirconia (YSZ) as an electrolyte, nickel/YSZ cermet as an anode, lanthanum strontium manganese oxide (LSM) as a cathode. The cells were prepared by tape-casting and screen-printing techniques. The cathode processing parameters have been correlated with fuel cell performance. The results of the single chamber were compared with conventional SOFCs tested in our laboratory.",

author = "Fatih Dogan and P. Jasinki and T. Suzuki and Z. Byars and Anderson, \{H. U.\}",

year = "2003",

doi = "10.1149/200307.1101PV",

language = "American English",

volume = "2003-07",

pages = "1101--1108",

booktitle = "Eighth International Symposium on Solid Oxide Fuel Cells (SOFC-VIII)",

publisher = "IOP Publishing",

}

TY - GEN

T1 - Comparison of anode and electrolyte support configuration of single-chamber SOFC

AU - Dogan, Fatih

AU - Jasinki, P.

AU - Suzuki, T.

AU - Byars, Z.

AU - Anderson, H. U.

PY - 2003

Y1 - 2003

N2 - The single-chamber solid oxide fuel cell (SOFC) has recently received considerable attention. This type of fuel cell operates in the mixed reactant gas and therefore does not require separation of the fuel and oxidant gases. In this paper we report the anode- and electrolyte-supported configurations of the single chamber SOFC that we have studied. The system based on typical fuel cell composition has been examined: yttrium stabilized zirconia (YSZ) as an electrolyte, nickel/YSZ cermet as an anode, lanthanum strontium manganese oxide (LSM) as a cathode. The cells were prepared by tape-casting and screen-printing techniques. The cathode processing parameters have been correlated with fuel cell performance. The results of the single chamber were compared with conventional SOFCs tested in our laboratory.

AB - The single-chamber solid oxide fuel cell (SOFC) has recently received considerable attention. This type of fuel cell operates in the mixed reactant gas and therefore does not require separation of the fuel and oxidant gases. In this paper we report the anode- and electrolyte-supported configurations of the single chamber SOFC that we have studied. The system based on typical fuel cell composition has been examined: yttrium stabilized zirconia (YSZ) as an electrolyte, nickel/YSZ cermet as an anode, lanthanum strontium manganese oxide (LSM) as a cathode. The cells were prepared by tape-casting and screen-printing techniques. The cathode processing parameters have been correlated with fuel cell performance. The results of the single chamber were compared with conventional SOFCs tested in our laboratory.

U2 - 10.1149/200307.1101PV

DO - 10.1149/200307.1101PV

M3 - Conference contribution

VL - 2003-07

SP - 1101

EP - 1108

BT - Eighth International Symposium on Solid Oxide Fuel Cells (SOFC-VIII)

PB - IOP Publishing

ER -

Comparison of anode and electrolyte support configuration of single-chamber SOFC

Abstract

Access to Document

Fingerprint

Cite this