Skip to main navigation Skip to search Skip to main content

Ceramic-metal and Ceramic-intermetallic Composites by Reactive Processing

Research output: Contribution to journal › Article › peer-review

Abstract

Ceramic-metal and ceramic-intermetallic composites were prepared by reactive hot pressing. The ceramic to metal ratio of each composition was set by the stoichiometry of a thermodynamically favorable displacement reaction. The powder mixing method and the heating rate during hot pressing were found to have a profound influence on the final microstructure and properties of hot pressed composites. The best composites, judged by mechanical properties, were produced by hot pressing attrition milled precursors using l°C/min heating rates. The four-point bend strength, fracture toughness, Young's modulus, and hardness were measured for Al2O3-MoSi2, Al2O3-Ni, and Al2O3-Nb composites.

Original languageAmerican English
JournalCeramic Engineering and Science Proceedings
DOIs
StatePublished - Mar 1 2008

Keywords

  • Dense Mullite Noncomposites
  • Densification Behavior
  • Microstructural Analyses
  • Nano-Scale Dispersion
  • Pulse Electric Current

Disciplines

  • Materials Science and Engineering

Fingerprint

Dive into the research topics of 'Ceramic-metal and Ceramic-intermetallic Composites by Reactive Processing'. Together they form a unique fingerprint.

Cite this