Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached

Yun Ji; Bruce Archambeault; Todd H. Hubing

doi:10.1109/ISEMC.2001.950645

Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached

Yun Ji
, Bruce Archambeault
, Todd H. Hubing

Missouri University of Science and Technology

Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

This paper investigates a canonical printed circuit board (PCB) problem using both a method of moments (MoM) and a partial element equivalent circuit (PEEC) modeling technique. The problem consists of a PCB populated with three traces. One trace is a signal line and the other two are I/O lines that couple to the signal line and extend beyond the boundary of the board. Although the MoM code was a frequency domain code and the PEEC code was a time-domain code, good agreement was achieved in both the time-domain and the frequency-domain

Original language	American English
Journal	Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, 2001
DOIs	https://doi.org/10.1109/ISEMC.2001.950645
State	Published - Jan 1 2001

Keywords

1/0 Lines
Canonical Printed Circuit Board Problem
Circuit Simulation
Computer Simulation
EMC Modeling Problems
Electromagnetic Compatibility
Electromagnetic Interference
Equivalent Circuits
Frequency Domain Code
Frequency-Domain Analysis
Method of Moments
PCB Traces
PEEC Code
Partial Element Equivalent Circuit Modeling Technique
Printed Circuits
Signal Line
Time-Domain Analysis
Time-Domain Code

Disciplines

Electrical and Computer Engineering

Access to Document

10.1109/ISEMC.2001.950645License: Unspecified

Applying the Method of Moments and the Partial Element EquivalentFinal published version, 474 KBLicense: Unspecified

Cite this

Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached. / Ji, Yun; Archambeault, Bruce; Hubing, Todd H.
In: Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, 2001, 01.01.2001.

Research output: Contribution to journal › Article › peer-review

@article{59e6bb468dae4cadae9b0333735d0790,

title = "Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached",

abstract = "This paper investigates a canonical printed circuit board (PCB) problem using both a method of moments (MoM) and a partial element equivalent circuit (PEEC) modeling technique. The problem consists of a PCB populated with three traces. One trace is a signal line and the other two are I/O lines that couple to the signal line and extend beyond the boundary of the board. Although the MoM code was a frequency domain code and the PEEC code was a time-domain code, good agreement was achieved in both the time-domain and the frequency-domain",

keywords = "1/0 Lines, Canonical Printed Circuit Board Problem, Circuit Simulation, Computer Simulation, EMC Modeling Problems, Electromagnetic Compatibility, Electromagnetic Interference, Equivalent Circuits, Frequency Domain Code, Frequency-Domain Analysis, Method of Moments, PCB Traces, PEEC Code, Partial Element Equivalent Circuit Modeling Technique, Printed Circuits, Signal Line, Time-Domain Analysis, Time-Domain Code",

author = "Yun Ji and Bruce Archambeault and Hubing, \{Todd H.\}",

year = "2001",

month = jan,

day = "1",

doi = "10.1109/ISEMC.2001.950645",

language = "American English",

journal = "Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, 2001",

}

TY - JOUR

T1 - Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached

AU - Ji, Yun

AU - Archambeault, Bruce

AU - Hubing, Todd H.

PY - 2001/1/1

Y1 - 2001/1/1

N2 - This paper investigates a canonical printed circuit board (PCB) problem using both a method of moments (MoM) and a partial element equivalent circuit (PEEC) modeling technique. The problem consists of a PCB populated with three traces. One trace is a signal line and the other two are I/O lines that couple to the signal line and extend beyond the boundary of the board. Although the MoM code was a frequency domain code and the PEEC code was a time-domain code, good agreement was achieved in both the time-domain and the frequency-domain

AB - This paper investigates a canonical printed circuit board (PCB) problem using both a method of moments (MoM) and a partial element equivalent circuit (PEEC) modeling technique. The problem consists of a PCB populated with three traces. One trace is a signal line and the other two are I/O lines that couple to the signal line and extend beyond the boundary of the board. Although the MoM code was a frequency domain code and the PEEC code was a time-domain code, good agreement was achieved in both the time-domain and the frequency-domain

KW - 1/0 Lines

KW - Canonical Printed Circuit Board Problem

KW - Circuit Simulation

KW - Computer Simulation

KW - EMC Modeling Problems

KW - Electromagnetic Compatibility

KW - Electromagnetic Interference

KW - Equivalent Circuits

KW - Frequency Domain Code

KW - Frequency-Domain Analysis

KW - Method of Moments

KW - PCB Traces

KW - PEEC Code

KW - Partial Element Equivalent Circuit Modeling Technique

KW - Printed Circuits

KW - Signal Line

KW - Time-Domain Analysis

KW - Time-Domain Code

UR - https://scholarsmine.mst.edu/ele_comeng_facwork/902

U2 - 10.1109/ISEMC.2001.950645

DO - 10.1109/ISEMC.2001.950645

M3 - Article

JO - Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, 2001

JF - Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, 2001

ER -

Applying the Method of Moments and the Partial Element Equivalent Circuit Modeling Techniques to a Special Challenge Problem of a PC Board with Long Wires Attached

Abstract

Keywords

Disciplines

Access to Document

Other files and links

Fingerprint

Cite this