Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture

Toshio Suzuki; Piotr Z. Jasinski; Vladimir Petrovsky; Fatih Dogan; Harlan U. Anderson

doi:10.1149/1.1782141

Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture

Toshio Suzuki
, Piotr Z. Jasinski
, Vladimir Petrovsky
, Fatih Dogan
, Harlan U. Anderson

Missouri University of Science and Technology

Research output: Contribution to journal › Article › peer-review

Abstract

In this study, yttrium-stabilized zirconia (YSZ) thin films 1-2 µm thick electrolyte have been prepared using NiO-YSZ anode as substrates. Fuel cell test was conducted with the single chamber configuration in methane-air gas mixture using (La,Sr)(Co,Fe)O3 (LSCF) as the cathode. Test results showed that the open-circuit voltage to be >0.8 V, with power density as high as 0.12 W cm-2. It was also shown that gas flow rate has a large influence on the performance of the fuel cell, which indicates the importance of the geometrical design for anode support fuel cell system.

Original language	American English
Pages (from-to)	A1473-A1476
Journal	Journal of the Electrochemical Society
Volume	151
Issue number	9
DOIs	https://doi.org/10.1149/1.1782141
State	Published - Jan 1 2004

Keywords

Electrochemical Electrodes
Liquid Phase Deposition
Cobalt compounds
Electrolytes
Lanthanum compounds
Nickel compounds
Solid oxide fuel cells
Strontium compounds

Disciplines

Materials Science and Engineering

Access to Document

10.1149/1.1782141License: CC BY

https://doi.org/10.1149/1.1782141

Cite this

@article{6406b38180f44a2c95a7c46ccd11c8cf,

title = "Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture",

abstract = " In this study, yttrium-stabilized zirconia (YSZ) thin films 1-2 µm thick electrolyte have been prepared using NiO-YSZ anode as substrates. Fuel cell test was conducted with the single chamber configuration in methane-air gas mixture using (La,Sr)(Co,Fe)O3 (LSCF) as the cathode. Test results showed that the open-circuit voltage to be >0.8 V, with power density as high as 0.12 W cm-2. It was also shown that gas flow rate has a large influence on the performance of the fuel cell, which indicates the importance of the geometrical design for anode support fuel cell system.",

keywords = "Electrochemical Electrodes, Liquid Phase Deposition, Cobalt compounds, Electrolytes, Lanthanum compounds, Nickel compounds, Solid oxide fuel cells, Strontium compounds",

author = "Toshio Suzuki and Jasinski, \{Piotr Z.\} and Vladimir Petrovsky and Fatih Dogan and Anderson, \{Harlan U.\}",

year = "2004",

month = jan,

day = "1",

doi = "10.1149/1.1782141",

language = "American English",

volume = "151",

pages = "A1473--A1476",

journal = "Journal of the Electrochemical Society",

issn = "1945-7111",

number = "9",

}

TY - JOUR

T1 - Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture

AU - Suzuki, Toshio

AU - Jasinski, Piotr Z.

AU - Petrovsky, Vladimir

AU - Dogan, Fatih

AU - Anderson, Harlan U.

PY - 2004/1/1

Y1 - 2004/1/1

N2 - In this study, yttrium-stabilized zirconia (YSZ) thin films 1-2 µm thick electrolyte have been prepared using NiO-YSZ anode as substrates. Fuel cell test was conducted with the single chamber configuration in methane-air gas mixture using (La,Sr)(Co,Fe)O3 (LSCF) as the cathode. Test results showed that the open-circuit voltage to be >0.8 V, with power density as high as 0.12 W cm-2. It was also shown that gas flow rate has a large influence on the performance of the fuel cell, which indicates the importance of the geometrical design for anode support fuel cell system.

AB - In this study, yttrium-stabilized zirconia (YSZ) thin films 1-2 µm thick electrolyte have been prepared using NiO-YSZ anode as substrates. Fuel cell test was conducted with the single chamber configuration in methane-air gas mixture using (La,Sr)(Co,Fe)O3 (LSCF) as the cathode. Test results showed that the open-circuit voltage to be >0.8 V, with power density as high as 0.12 W cm-2. It was also shown that gas flow rate has a large influence on the performance of the fuel cell, which indicates the importance of the geometrical design for anode support fuel cell system.

KW - Electrochemical Electrodes

KW - Liquid Phase Deposition

KW - Cobalt compounds

KW - Electrolytes

KW - Lanthanum compounds

KW - Nickel compounds

KW - Solid oxide fuel cells

KW - Strontium compounds

UR - https://scholarsmine.mst.edu/matsci_eng_facwork/233

UR - https://doi.org/10.1149/1.1782141

U2 - 10.1149/1.1782141

DO - 10.1149/1.1782141

M3 - Article

SN - 1945-7111

VL - 151

SP - A1473-A1476

JO - Journal of the Electrochemical Society

JF - Journal of the Electrochemical Society

IS - 9

ER -

Anode Supported Single Chamber Solid Oxide Fuel Cell in Methane - Air Mixture

Abstract

Keywords

Disciplines

Access to Document

Other files and links

Fingerprint

Cite this