Kummer College of Innovation, Entrepreneurship, and Economic Development

Filter
Conference contribution

Search results

  • 2024

    A Design Methodology for Developing an ISS Inspired Long Duration Space Vehicle

    Mbagwu, E. & Allada, V., 2024, Proceedings of the IISE Annual Conference and Expo 2024. Greer, A. B., Contardo, C. & Frayret, J.-M. (eds.). Institute of Industrial and Systems Engineers, IISE, (Proceedings of the IISE Annual Conference and Expo 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • CONSIDERING STAKEHOLDER PERSPECTIVES IN AN INTEGRATED RESILIENCE FRAMEWORK

    Kraemer, V., Canfield, C. & Ferreira, S., 2024, Proceedings of the 2024 International Annual Conference and 45th Annual Meeting: Engineering Management Riding the Waves of Smart Systems, ASEM 2024. Natarajan, G., Zhang, H. & Ng, E. (eds.). American Society for Engineering Management, p. 487-496 10 p. (Proceedings of the 2024 International Annual Conference and 45th Annual Meeting: Engineering Management Riding the Waves of Smart Systems, ASEM 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Prediction of Carbonation Capacity of SCMs Using Ensemble Learning Method

    Cai, K., Liu, J., Mwanza, E., Fikru, M. G., Ma, H. & Wunsch, D. C., 2024, 2024 IEEE 7th International Conference on Industrial Cyber-Physical Systems, ICPS 2024. Institute of Electrical and Electronics Engineers Inc., (2024 IEEE 7th International Conference on Industrial Cyber-Physical Systems, ICPS 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2023

    A SYSTEM DYNAMICS MODELING APPROACH TO EXPLORE BITCOIN MARKET DYNAMICS

    Omole, O. & Enke, D., 2023, Proceedings of the American Society for Engineering Management 2023 International Annual Conference and 44th Annual Meeting: Climbing Higher with Engineering Management. Natarajan, G., Zhang, H. & Ng, E. H. (eds.). American Society for Engineering Management, p. 163-171 9 p. (Proceedings of the American Society for Engineering Management 2023 International Annual Conference and 44th Annual Meeting: Climbing Higher with Engineering Management).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • A Use Case for Developing Meta Architectures with Artificial Intelligence and Agent Based Simulation in the Kidney Transplant Complex System of Systems

    Threlkeld, R., Ashiku, L. & Dagli, C., 2023, 2023 18th Annual System of Systems Engineering Conference, SoSe 2023. Institute of Electrical and Electronics Engineers Inc., (2023 18th Annual System of Systems Engineering Conference, SoSe 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • EVALUATING SENSOR PLACEMENT VIA MACHINE LEARNING MODELS

    Sharafkhani, F. & Corns, S., 2023, Proceedings of the American Society for Engineering Management 2023 International Annual Conference and 44th Annual Meeting: Climbing Higher with Engineering Management. Natarajan, G., Zhang, H. & Ng, E. H. (eds.). American Society for Engineering Management, p. 646-653 8 p. (Proceedings of the American Society for Engineering Management 2023 International Annual Conference and 44th Annual Meeting: Climbing Higher with Engineering Management).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • IDENTIFICATION OF A RESPONSE AND RESCUE NETWORK FOR THE ST. LOUIS REGION

    Kutheis, N., Long, S., Asem, C. F., Corns, S. & Asem, C. F., 2023, IISE Annual Conference and Expo 2023. Babski-Reeves, K., Eksioglu, B. & Hampton, D. (eds.). Institute of Industrial and Systems Engineers, IISE, 1923. (IISE Annual Conference and Expo 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2022

    DEEP LEARNING MODELS AND TOOLS FOR DISASTER EVACUATION AND ROUTING

    Kutheis, N., Long, S. & Corns, S., 2022, ASEM 43rd International Annual Conference Proceedings. Natarajan, G., Ng, E. H., Katina, P. F. & Zhang, H. (eds.). American Society for Engineering Management, p. 279-284 6 p. (ASEM 43rd International Annual Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Representation of Physical and Non-Physical Interfaces and Interactions in IoT Platform Products

    Mbagwu, E. & Allada, V., 2022, IISE Annual Conference and Expo 2022. Ellis, K., Ferrell, W. & Knapp, J. (eds.). Institute of Industrial and Systems Engineers, IISE, (IISE Annual Conference and Expo 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • USING KEY ECONOMIC FACTORS FOR ENERGY PORTFOLIO TRANSITIONS IN CARIBBEAN ISLANDS

    Davis, A. A., Long, S. & Canfield, C., 2022, ASEM 43rd International Annual Conference Proceedings. Natarajan, G., Ng, E. H., Katina, P. F. & Zhang, H. (eds.). American Society for Engineering Management, p. 301-307 7 p. (ASEM 43rd International Annual Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2021

    Data Modeling for the Internet of Things

    Chua, C., 2021, 42nd International Conference on Information Systems, ICIS 2021 TREOs: "Building Sustainability and Resilience with IS: A Call for Action". Association for Information Systems, (42nd International Conference on Information Systems, ICIS 2021 TREOs: "Building Sustainability and Resilience with IS: A Call for Action").

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • DEEP LEARNING-BASED DISASTER MANAGEMENT PLANNING AND RISK ANALYSIS OF FLASH FLOOD-PRONE REGIONS

    Kanwar, B. & Corns, S., 2021, 2021 ASEM Virtual International Annual Conference "Engineering Management and The New Normal". American Society for Engineering Management, p. 360-368 9 p. (2021 ASEM Virtual International Annual Conference "Engineering Management and The New Normal").

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2020

    Impact of broadband internet on the well-being of rural counties: A benefit-cost analysis

    Valentín-Sívico, J., 2020, ASEM 41st International Annual Conference Proceedings "Leading Organizations through Uncertain Times". Keathley, H., Enos, J. & Parrish, M. (eds.). American Society for Engineering Management, (ASEM 41st International Annual Conference Proceedings "Leading Organizations through Uncertain Times").

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2019

    A Geometrically-based method for efficient many-objective decision-making

    Vanfossan, S., 2019, 2019 International Annual Conference Proceedings of the American Society for Engineering Management and 40th Meeting Celebration: A Systems Approach to Engineering Management Solutions, ASEM 2019. Schott, E., Keathley, H. & Krejci, C. (eds.). American Society for Engineering Management, (2019 International Annual Conference Proceedings of the American Society for Engineering Management and 40th Meeting Celebration: A Systems Approach to Engineering Management Solutions, ASEM 2019).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2018

    Rare but conceivable: Determining the likelihood of meteors and other infrequent events

    Schmidt, M. S. & Vega-Westhoff, M., 2018, Liaison Functions 2018 - Core Programming Area at the 2018 AIChE Spring Meeting and 14th Global Congress of Process Safety. AIChE, p. 23-43 21 p. (Liaison Functions 2018 - Core Programming Area at the 2018 AIChE Spring Meeting and 14th Global Congress of Process Safety).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Rare but conceivable: Determining the likelihood of meteors and other infrequent events

    Schmidt, M. S. & Vega-Westhoff, M., 2018, Sustainable Engineering Forum 2018 - Topical Conference at the 2018 AIChE Spring Meeting and 14th Global Congress on Process Safety. AIChE, p. 71-90 20 p. (Sustainable Engineering Forum 2018 - Topical Conference at the 2018 AIChE Spring Meeting and 14th Global Congress on Process Safety).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2016

    Computational intelligence based complex adaptive system-of-system architecture evolution strategy

    Agarwal, S., Dagli, C. H. & Pape, L. E., 2016, Proceedings of the 6th International Conference on Complex Systems Design and Management, CSD and M 2015. Bonjour, E., Auvray, G., Bocquet, J.-C., Krob, D. & Bocquet, J.-C. (eds.). Springer Berlin Heidelberg, p. 119-132 14 p. (Proceedings of the 6th International Conference on Complex Systems Design and Management, CSD and M 2015; vol. 2016-January).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2014

    The internet, happiness, and social interaction: A review of literature

    Hall, R. H. & Banaszek, A., 2014, HCI in Business - First International Conference, HCIB 2014, Held as Part of HCI International 2014, Proceedings. Springer Verlag, p. 166-174 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8527 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2013

    Psychophysiological assessment tools for evaluation of learning technologies

    Hall, R. H., Lockwood, N. S. & Sheng, H., 2013, Human Interface and the Management of Information: Information and Interaction for Learning, Culture, Collaboration and Business - 15th International Conference, HCI International 2013, Proceedings. PART 3 ed. p. 33-42 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8018 LNCS, no. PART 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2012

    A comparative analysis of two popular quality measurement systems in the automobile industry

    Senoz, O., Daughton, W. & Gosavi, A., 2012, Annual International Conference of the American Society for Engineering Management 2012, ASEM 2012 - Agile Management: Embracing Change and Uncertainty in Engineering Management. p. 620-624 5 p. (Annual International Conference of the American Society for Engineering Management 2012, ASEM 2012 - Agile Management: Embracing Change and Uncertainty in Engineering Management).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • A model-based reference architecture for medical device development

    Corns, S. & Gibson, C., 2012, 22nd Annual International Symposium of the International Council on Systems Engineering, INCOSE 2012 and the 8th Biennial European Systems Engineering Conference 2012, EuSEC 2012. p. 2731-2740 10 p. (22nd Annual International Symposium of the International Council on Systems Engineering, INCOSE 2012 and the 8th Biennial European Systems Engineering Conference 2012, EuSEC 2012; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Develop a human performance modeling system for process safety operations

    Harputlu, E., Murray, S. L., Mentzer, R. A. & Mannan, M. S., 2012, Global Congress on Process Safety 2012 - Topical Conference at the 2012 AIChE Spring Meeting and 8th Global Congress on Process Safety. p. 190-202 13 p. (Global Congress on Process Safety 2012 - Topical Conference at the 2012 AIChE Spring Meeting and 8th Global Congress on Process Safety; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Develop a human performance modeling system for process safety operations

    Harputlu, E., Murray, S. L., Mentzer, R. A. & Mannan, M. S., 2012, 12AIChE - 2012 AIChE Spring Meeting and 8th Global Congress on Process Safety, Conference Proceedings. (AIChE Annual Meeting, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Systems engineering education in the US: Textbooks and programs

    Fraser, J. M. & Gosavi, A., 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education, (ASEE Annual Conference and Exposition, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Two-semester agile systems engineering design course: Investigation and exploration of "immersive" training technologies

    Bodenhamer, A., Guardiola, I. G., Corns, S. M. & Dagli, C. H., 2012, 119th ASEE Annual Conference and Exposition. American Society for Engineering Education, (ASEE Annual Conference and Exposition, Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2011

    Agent-based model of aerial ad-hoc network market potential

    Watkins, C. B. & Dagli, C. H., 2011, 30th Digital Avionics Systems Conference - Closing the Generation Gap: Increasing Capability for Flight Operations among Legacy, Modern and Uninhabited Aircraft, DASC 2011. p. 8D21-8D215 6096151. (AIAA/IEEE Digital Avionics Systems Conference - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Communicating in chaos: The evolution of emergency response architecture and weaknesses therein

    Miller, L. & Corns, S., 2011, Annual International Conference of the American Society for Engineering Management 2011, ASEM 2011. p. 230-235 6 p. (Annual International Conference of the American Society for Engineering Management 2011, ASEM 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cost analysis in surface metrology: An overview

    Gosavi, A. & Cudney, E. A., 2011, Annual International Conference of the American Society for Engineering Management 2011, ASEM 2011. p. 560-564 5 p. (Annual International Conference of the American Society for Engineering Management 2011, ASEM 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Pervasive innovation: Taking innovation deep and wide across and through the organization

    Bachman, B. J. & Bozzone, S. O., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 1933-1936 4 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Plastic packaging: A current persepctive on sustainability

    Bashyal, S., Bachman, B. J. & Baumann, M. H., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 1937-1941 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2010

    Assessing the viability of an interdisciplinary design engineering program via a branding method

    Elrod, C. C., Lough, K. G. & Adams, K., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. p. 575-583 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 8, no. PART A).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2009

    Comparing component functional template modeling experimental results in an undergraduate level engineering design course

    Abbott, D. & Lough, K. G., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. p. 265-272 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design for manufacturing (DFM) methodology to implement Friction Stir Welding (FSW) for automobile chassis fabrication

    Bagaitkar, H. & Allada, V., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. p. 219-226 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • The part count tool (PaCT) for concept selection

    Parashar, T., Lough, K. G. & Stone, R. B., 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 187-195 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2008

    A cost model for the Metal Inert Gas (MIG) welding process

    Tipaji, P. K., Allada, V. & Mishra, R., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 751-760 10 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Application of design of experiments to flight test: A case study

    Tucker, A. A., Hutto, G. T. & Dagli, C. H., 2008, U.S. Air Force T and E Days. 2008-1632. (U.S. Air Force T and E Days).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Application of product platform design for engineered systems

    Goswami, M. & Allada, V., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1059-1070 12 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 6 PART B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Comparing component functional template modeling experimental results in an undergraduate level engineering design course

    Abbott, D. & Lough, K. G., 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. p. 265-272 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Concepts of modularity in Systems Engineering and developmental Biology

    Crabtree, T. & Dagli, C., 2008, 18th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2008. p. 2721-2732 12 p. (18th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2008; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design for Manufacturing (DFM) methodology to implement Friction Stir Welding (FSW) for automobile chassis fabrication

    Bagaitkar, H. & Allada, V., 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. p. 219-226 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Evaluation of a virtual reality simulator developed for training new miners to install rock bolts using a jackleg drill

    Nutakor, D., Apel, D., Grayson, L., Hilgers, M., Hall, R. & Warmbrodt, J., 2008, Society for Mining, Metallurgy and Exploration - SME Annual Meeting and Exhibit 2008: "New Horizons - New Challenges". p. 339-342 4 p. (Society for Mining, Metallurgy and Exploration - SME Annual Meeting and Exhibit 2008: "New Horizons - New Challenges").

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2007

    Development to high-volume manufacturing: Reducing the risks

    Cudney, E., Drain, D. & Grantham Lough, K., 2007, CITSA 2007 - Int. Conference on Cybernetics and Information Technologies, Systems and Applications and CCCT 2007 - Int. Conference on Computing, Communications and Control Technologies, Proceedings. p. 128-133 6 p. (CITSA 2007 - Int. Conference on Cybernetics and Information Technologies, Systems and Applications and CCCT 2007 - Int. Conference on Computing, Communications and Control Technologies, Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Knowledge management: A key element of success

    Long, L. P. & Dagli, C. H., 2007, 17th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2007 - Systems Engineering: Key to Intelligent Enterprises. p. 1274-1290 17 p. (17th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2007 - Systems Engineering: Key to Intelligent Enterprises; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • NCW - Nature's predator-prey abstraction

    Gregg, M. L., Miller, A. & Dagli, C., 2007, 17th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2007 - Systems Engineering: Key to Intelligent Enterprises. p. 2044-2058 15 p. (17th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2007 - Systems Engineering: Key to Intelligent Enterprises; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2006

    Effective supplier involvement in product development projects

    Pakala, P. K. & Allada, V., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Design Engineering. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Design Engineering Division (Publication) DE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Indirect earthquake loss estimation for St. Louis metropolitan highway network

    Tirasirichai, C. & Enke, D., 2006, 27th Annual National Conference of the American Society for Engineering Management 2006 - Managing Change: Managing People and Technology in a Rapidly Changing World, ASEM 2006. p. 160-167 8 p. (27th Annual National Conference of the American Society for Engineering Management 2006 - Managing Change: Managing People and Technology in a Rapidly Changing World, ASEM 2006).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Neuro-Fuzzy volume adjusted moving averages for intelligent trading decisions

    Chavarnakul, T. & Enke, D., 2006, 27th Annual National Conference of the American Society for Engineering Management 2006 - Managing Change: Managing People and Technology in a Rapidly Changing World, ASEM 2006. p. 279-288 10 p. (27th Annual National Conference of the American Society for Engineering Management 2006 - Managing Change: Managing People and Technology in a Rapidly Changing World, ASEM 2006).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Product composition selection problem: A fuzzy-goal programming approach

    Choudhury, A. K. & Allada, V., 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Design Engineering. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Design Engineering Division (Publication) DE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Use of Technical Business Practices by geographically separated teams to facilitate concurrent engineering of ultraquality systems (LA-UR-05-8500)

    Neff, W. & Dagli, C., 2006, 16th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2006. p. 1179-1196 18 p. (16th Annual International Symposium of the International Council on Systems Engineering, INCOSE 2006; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2005

    A student response system for increasing engagement, motivation, and learning in high enrollment lectures

    Hall, R. H., Collier, H. L., Thomas, M. L. & Hilgers, M. G., 2005, Association for Information Systems - 11th Americas Conference on Information Systems, AMCIS 2005: A Conference on a Human Scale. p. 1792-1797 6 p. (Association for Information Systems - 11th Americas Conference on Information Systems, AMCIS 2005: A Conference on a Human Scale; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution